Filter
Top Products
51
English
Radio Mode
Symptom
Cause and Solution
Unable to receive stations. • No antenna or open connection in cable.
– Make sure the antenna is properly
connected; replace the antenna or cable
if necessary.
Unable to tune stations in the seek mode. • You are in a weak signal area.
– Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal
area, the antenna may not be grounded and
connected properly.
– Check your antenna connections; make
sure the antenna is properly grounded at
its mounting location.
• The antenna may not be the proper length.
– Make sure the antenna is fully extended;
if broken, replace the antenna with a new
one.
Broadcast is noisy.
• The antenna is not the proper length.
– Extend the antenna fully; replace it if it is
broken.
• The antenna is poorly grounded.
– Make sure the antenna is grounded
properly at its mounting location.
Output sounds dull.
Tape Mode
• The tape head needs cleaning.
– Clean the tape head.
• Incorrect Dolby NR in use.
– Check Dolby NR switch setting.
In Case of Difficulty