24
OSD Setting
Basic and simple instruction on the control keys.
Luminance
Image Setup Color Setup Picture Boost OSD Setup Extra Exit
50
Brightness
Standard
Gamma
Gamma 1
OffDCR
Eco mode
MediumOverdrive
OnDPS
Contrast 50
1. Press the
-button to activate the OSD window.
2. Press < or > to navigate through the functions. Once the desired function is highlighted, press the
-button to
activate it . press < or > to navigate through the sub-menu functions. Once the desired function is highlighted, press
-button to activate it.
3. Press < or > to change the settings of the selected function. Press
to exit. If you want to adjust any other
function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the
button while the monitor is off and then press
button to turn the monitor on. To un-lock the OSD - press and hold the
button while the monitor is off and then
press
button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of "Input Select" is disable to adjust.
2. If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to
adjust.
3. One of Clear vision, DCR, Color Boost, and Picture Boost functions is activated; the other three functions are turned
off accordingly.