1-2
Chapter 1: Product Introduction
1.3 Assembling the monitor base
1. Attach the base to the arm.
2. Beware to align the latch to the notch on the base.
3. The end of the arm will slightly protrude from the base. No need to
push it in.
4. Screw the base to the arm tightly.
4
2
1
3
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damagetothemonitor.
1.4 Connect cables
Connectthecablesyouneedbasedonchapter1.5.2,page1-5.
• Flip upward the IO port cover to connect cables. After connected cables,
replacethecoverandcarefullypushitupwardtoitsoriginalpositionwithboth
thumbs at both sides of the cover.