2-22-2
2-22-2
2-2
Chapter 2: SetupChapter 2: Setup
Chapter 2: SetupChapter 2: Setup
Chapter 2: Setup
2.2 Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW19 Series LCD monitor is specially designed
for VESA wall mount.
To detach the arm/stand:
1. Have the front of the monitor face down on a table.
2. Use a screwdriver to remove the screw on the stand of the monitor as
the below drawing shows.
• We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
• Hold the stand of the monitor when you remove the screw.
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.
screw