AtlasSound.com – 16 –
Specifications are subject to change without notice.
Owner’s ManualDSP8807
Digital Processor
and Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
3. The ‘Sound Media Interface’ GUI will automatically prompt you to enter acceptable values within the operating system when these
are being typed in.
MASKING - NOISE SETTINGS
These are all settings relative to establishing appropriate masking levels for each Zone 1 to 8. Start adjustment with the LEFT selection
buttons; Noise 1 and 2 and work in progression to the right to ‘Noise Trim’. The DSP8807 has two (2) independent random masking
generators on board that can be optioned in any given zone.
NOISE 1 AND 2:
1. This button selection turns the masking, On or Off.
NOISE 1 AND 2 VOLUME
1. Select the ‘Noise 1 Volume / Noise 2 Volume’ which presents a ‘Noise 1 Volume’ level adjustment which can be set by sliding
the center knob or typing in the desired level from -65dB to +15dB.
NOTE: When entering an adjustment
value and a value outside the operating
range is entered, an "Out of Range"
message will appear prompting for the
a new value to be entered.