Atlona AT-HDDA-8 Car Amplifier User Manual


 
3
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Introduction
With 4kx2k pass through the Atlona HDMI Distribution Amplifiers offer high definition solutions
for multi display installations. Field upgradable, with a built in USB port, ensures seamless firmware
updating. With EDID learning mode, the HDDA provides a solution for incompatibilities and
intermittent signals.
Package Contents
Features
• 1 x AT-HDDA-8
• 1 x Wall rack/mount ears
• 1 x DC 5V locking power adaptor
• Transmits source signal to multiple displays simultaneously
• Built in EDID management to ensure compatibility
• 4kx2k pass through
• Lossy and lossless audio formats pass through (up to Dolby TrueHD
®
and DTS-HD Master Audio™)
• Full 3D pass through
• Field serviceable USB firmware port for quick and easy updating
• LED signal lights to verify status for input and outputs
• Using additional HDDAs, cascade the source signal up to 4 times at 1080p
• HDCP compliant
Panel Description
Front Panel
AT-HDDA-8
DC 5VDC 5V
BACKUP
MAIN
5
6
7
8
4
OUTPUT
1
2
3
4
5 6
7 8
AT-HDDA-8
1
2
3
B
M
EDID
INT LEARN
POWER SYNC
ANALOG
SPDIF
L
-
+
-
+
R
HDMI IN
FIRMWARE
1. Power LED: Will light up when the distribution amplifier receives power
2. Sync LED: Illuminates when receiving signal from the source
3. Out LED: Each LED will illuminate for the corresponding connected displays
4. EDID LEDs: LED will illuminate to indicated the current EDID mode
5. EDID button: Press to select between EDID modes
1
2
5
4
3