Filter
Top Products
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
5
2. Rear Panel
1. Outputs 1- 2 via HDMI and RJ45.
2. HDMI Inputs 1 - 4.
3. Outputs 3 - 4 via HDMI and RJ45.
4. RS485 port – comes with RS485 to RS232 adapter.
5. TCP/IP port.
6. 12v DC input.
7. IR extension for controlling the switcher from further away.
8. IR port for controlling devices located near the switch.
9. DIP Switch Selection
Note: The TCP/IP port has to be connected to the computer via direct Crosswire CAT5/6/7 wire while if connected to the
router it needs to be connected though Straight wire.
1 2 3
4 5 6
7
8
9
HDMI Receiver (4 x Receivers included)
RJ45 inputs – please be careful when connecting RJ45 # 1 and # 2 inputs. They absolutely have to match the
outputs on the switch. Output # 1 should be connected to Input # 1 and Output # 2 should be connected to
Inputs # 2.
RJ45 Inputs
IR Input RX
Power Input
HDMI Out
When connecting Galvanic Isolated
Cable, connect the Stereo Side to
the HDMI Receiver and Mono to
the TV IR Output