Filter
Top Products
4
INSTALLATION
AT-SDI-16 [Bottom Panel]
The 4-pin DIP switch is reserved for AT-SDI-14RC and AT-SDI-16RC that have re-
clocking functionality. It's not in use for AT-SDI-16.
1. Connect a camera or other devices equipped with SDI / HD-SDI outputs to AT-SDI-16
HD/SD-SDI input.
2. Connect devices equipped with SDI / HD-SDI inputs (e.g. monitors or video processors) to
AT-SDI-16 HD/SD-SDI outputs.
3. Connect to the 5V/4A power supply unit.
Diagram: