AudioBahn AT60J Car Speaker User Manual


 
Installation
8
The crossover will allow the tweeter to play the
correct frequencies without sending harmful
low frequencies to the tweeter.
1. Make sure that you match the solid blue
wire with the solid blue wire (Positive)
2. Make sure that you match the blue with
black wire to the blue with black wire
(Negative)
AT60
4 OHMS
INPUT
OUTPUT
Wiring the tweeter to the crossover
Back of Tweeter
If you are looking at the back of any of our Audio-
bahn tweeters, the right wire is your positive (+)
and the left wire is your negative (-) wire.