Filter
Top Products
The I22 allows you to rename the inputs and change the offset and balance of each
input to suit the sources in your system.
You can give any input a name of your choice of
up to six characters.
To rename an input
•
Select the input you want to rename.
•
Press and hold down both SELECTOR
buttons for three seconds until the first
character starts flashing.
01 23
•
Select the character you want to edit using the
SELECTOR buttons.
The selected character is shown flashing.
•
Edit the character using the VOLUME control.
You can step through the sequence A to Z, 0 to 9,
_, -, and blank. For example:
BLURAY 23
When you’ve finished editing the name:
•
Press and hold down both SELECTOR
buttons for three seconds until the selected
character stops flashing.
You can adjust the relative volume of each input,
between +9 and -9.
To change the input offset
•
Select the input you want to change.
•
Press and hold down the upper SELECTOR
button for three seconds until the display
shows the current offset.
OFFSET 00
•
Adjust the offset using the VOLUME control.
•
Press the lower SELECTOR button to exit.
You can adjust the initial balance of each input,
between 0 and -9 in either direction.
To change the input balance
•
Select the input you want to change.
•
Press and hold down the upper SELECTOR
button for three seconds until the display
shows OFFSET.
•
Press the upper SELECTOR button again
until the display shows the current balance
offset.
BAL 00LR00
•
Adjust the balance offset using the VOLUME
control.
•
Press the lower SELECTOR button to exit.