Filter
Top Products
128-7297
16 of 20
-16-
Wireless FM Modulator
The VOH8512 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the VOH8512 audio signal by tuning your
vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9MHz). This feature is accessed by using either the FM transmitter
buttons on the remote (ON/OFF, Channel Select) or the FM Select button on the unit. Whenever the FM modulator is on, broadcast
reception on the vehicles radio will be poor. Switching off the FM modulator will allow normal radio reception.
*NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM
signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio
stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in
your overhead pod.
If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio
quality. Please contact the installer if this is the case with your product.
AV1/AV2 Input
The AV1/AV2 video input may be connected to a DVD Player, video game system, or other audio / video devices. To access the A/
V inputs, turn the VOH8512 on and press the source button on the VOH8512 or the Source button on the remote control until “AV1”
or “AV2” is displayed on the screen. Turn the video source component on with its power button or remote control. The VOH8512 is
now ready to play the audio and video signals from the source connected to AV1/AV2 input. The AV1/AV2 input requires a 8010730
cable.
AUX A/V Input
The VOH8512 will accept an audio/video signal input through the AUX jacks located on the side of the unit. The audio/video device
could be a video game system, video camera, or other input device (use the supplied AV adaptor cable).
Video Out
The VOH8512 provides a video output for an optional video monitor(s). This output will provide a video signal that duplicates the
signal displayed by the VOH8512 to an additional monitor or video display. Please see your installer for more inofrmation.