Filter
Top Products
Installation Instructions
T-slot for Mounting
4-Bolt Amps Style Mount
Figure 2 (Mounting the Monitor)
NOTE: Amps Style Mount is an industry standard 4-bolt pattern for assorted
style mounts available at many retailers. Use caution when installing bolts, as
bolts that are too long will damage the monitor.
(1) Installing the Visor Clip (mounting bracket)
a) Slide the Visor Clip all the way onto the T-slot on the back of the
monitor, as shown in figure 2.
b) Slide the Visor Clip over the sun visor.
(2) Installing the Suction Cup Mount
c) Slide the T-bolt on the base of the suction cup mount into the T-slot
on the back of monitor display.
d) Tighten the T-nut until snug with the back of the monitor.
e) Place the suction cup on the windshield and adjust to a suitable angle
for observing the image on the monitor. Be sure not to obstruct your
view through the windshield.
4