Filter
Top Products
99
99
9
bmbm
bmbm
bm FM MONO/INTRO (INT) SELECT BUTTON
During FM radio operation, press this button to
select mono or stereo reception of the broadcast
signal. Under normal reception mode as
indicated by the ST
icon on the display panel
when tuned to an FM stereo signal. If the stereo
signal is too noisy for comfortable listening,
press the MONO/INT select button to switch to
monaural reception (the ST
icon will
disappear from the display panel). To return to
stereo reception mode, press the button again
so that the ST
indication reappears.
bnbn
bnbn
bn LOCAL (LOC)/REPEAT (RPT) BUTTON
During radio operation, received signals are
usually in stereo mode as indicated by the
ST
icon; however, when the signals are
weak or intermittent, it may be worthwhile
activating the Local (LOC) mode by pressing
the LOC/RPT button (LOC appears on the
display). This mode favors access to local
stations whose signals are much stronger,
thereby improving radio reception. Press this
button again to terminate local receive mode;
LOC disappears from the display panel.
bobo
bobo
bo AUDIO MUTE (MUTE)
This button is used to mute the volume from
the system. By pressing the button, a MUTE
indication will appear on the display panel and
the volume will be muted. Pressing the MUTE
button again, or pressing the Volume Control
buttons or Select (SEL) button will return the
volume level to the setting in use before the
Mute function was activated.
bp bp
bp bp
bp MODE BUTTON
This button enables selection of either radio
or disc play. When a CD is loaded, pressing
this button will revert to radio operation; the
disc icon (
) will still be displayed, indicating
a disc is still loaded in the unit. Pressing the
button again will return to disc play, but the
current track will start from the beginning.
bqbq
bqbq
bq
LIQUID CRYSTAL DISPLAY PANEL
FUNCTIONS
The Liquid Crystal Display (LCD) panel dis-
plays the frequency, time, and all activated func-
tions, including five bar graphs which provide a
visual representation of the audio signal level.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures
for an extended period of time, they
may take longer to illuminate than
under normal conditions. In addition,
the visibility of the numbers on the
LCD may slightly decrease. The LCD
read-out will return to normal when the
temperature increases to a normal
range.
br br
br br
br DISC SLOT
With the label surface facing up, fully insert a
compact disc into the slot until the load
mechanism engages; CdP will appear
together with the fixed disc symbol (
). The
symbol will then become animated and play
will begin from the first TRACK ( 01) on the disc,
accompanied by the elapsed time of track play.
NOTE: This unit is designed for play of
standard 5" (12cm) Compact Discs
ONLY. Do not attempt to use 3"
(8cm) CD-Singles in this unit, either
with or without an adapter, as
damage to the player and/or disc
can occur. Such damage will not
be covered by the Warranty on this
product.
bsbs
bsbs
bs CD PLAY/PAUSE (
/
) SELECTOR
During disc play, pressing this button will
temporarily stop play of the disc (the disc symbol
(
) will flash on the display panel). Press the
button again to resume play of the disc from the
point at which it was stopped. Playback will
continue until all tracks on the disc have been
played, after which playback will automatically
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS