Filter
Top Products
FIG. A
FIBERGLASS CAP ROOF
( CROSS SECTION OF ROOF)
RBERGLASS ROOF CAP
STEEL ROOF
:":,.:;:c;:;:;c:;,,;;.:c:.:'ii:::i
FIG. A DISASSEMBLY:
AIR GAP
AIR GAP
1. Remove molded inside headliner prior
to installation
2. Do not remove the fiberglass roof cap
LMOLDED HEADLINER
See F1g. 1. for Installation
FIG. B
STEEL ROOF WITH HEADLINER
{CROSS SECTION OF ROOF)
FIG. B DISASSEMBLY:
1. Remove molded inside headliner prior
to installation
Note: If the air gap (space) between the
steel roof and the headliner is less
than 1/4" , refer to Fig. C
See Fig. 2 for Installation
FIG. C
STEEL ROOF ONLY
(CROSS SECTION OF ROOF)
r; STEEL ROOF
FIG. B DISASSEMBLY:
1. If the roof has an inside headliner that
is either flush or has an air gap of less
than 1/4" , do not remove the headliner
L NOTE: SOME OF THESE TYPES
OF ROOFS HAVE A HEADLINER
THAT IS GLUED TO INSIDE
OF THESE OF THE ROOF (NO
GAP IS IN RG. C)
See FIg. 3 for Installation