Filter
Top Products
10
Note: This cable (18) is used to connect to a Video Cassette Player
or DVD player that doesn't accept the IR Repeater 1/8" (3.5mm)
style plug (17). The IR Repeater Transmitter is provided with an
adhesive that allows it to adhere to the remote sensor of the
Video Cassette Player or DVD player. Remove the backing
covering the adhesive and place the IR Repeater Transmitter
directly over the Video remote sensor of Cassette Player or
DVD player.
D. Operation:
1. Connect the monitor power input plug (10) to a DC power source
(Red plug +12 VDC, Black plug (-) to ground).
2. Connect the external video source output signal (from VCP, DVD, TV
etc.) to the VIDEO IN jack (13 or 16).
3. Press power button (2) to turn the monitor on and off. The backlight
for the button will turn brighter.
4. Press the volume up (5) or down (6) button to adjust the volume level.
5. Press the picture button (4) to adjust the picture display characteris-
tics. The adjustments will be shown on the On Screen Display in the
following sequence: Color, Brightness, Contrast, and TINT. While in
the picture select mode (video adjustment), press the up button (5)
to increase the selected adjustment level or press the down button
(6) to decrease the level.