Filter
Top Products
-5-
characteristics of human hearing. Press the LOUD button
momentarily to activate this feature and the indication LOUD will
appear on the display panel. Pressing the button again momentarily
will deactivate the feature (the LOUD indication will disappear from
the display panel).
9 AM/FM BAND SELECTOR (BAND)
During radio operation, each time this button is pressed, the radio
band is changed. The indication AM I, AM II, FM I, FM II or FMIII
will appear on the display panel according to your selection. During
disc or audio cassette play, pressing this button will stop play of
the disc or cassette and switch to radio operation. The disc and/
or cassette will remain in the machine without being ejected. During
this time, the and/or
T-IN
icons will remain on the display
panel to show that a disc and/or tape cassette is still loaded in
the unit. Press the disc play/pause ( ) button to return to
disc play from the beginning of the last track in play, or press the
TAPE button to return to cassette play from the beginning of the
last track in play.
When AM I or AM II is selected, the stereo ( ) indication will
disappear from the display.
bl MANUAL UP/DOWN TUNING ( / ) / AUTOMATIC
SEEK TUNING
To manually select a radio station, momentarily press the Up Tuning
( ) side of the button to advance the unit two digits higher or
the Down Tuning ( ) side of the button to tune two digits
lower.
Pressing either side of the button for longer than 0.5 second and
then releasing will activate the Automatic Seek Tuning function.
The radio will seek the next station in the selected direction and
stop and remain at that frequency.
Pressing and holding either side of the button for longer than 0.5
second will cause the radio to continue tuning rapidly in the
selected direction until the next available station and momentarily
stop there. Tuning in the same direction will continue unless the
the button is released at the desired station.
bm LOCAL SELECTION (LOC)
This feature provides automatic selection of signals at which
the radio will stop during Auto-Store (AS) tuning; thus, only strong
(local) stations will be received and selected. When Auto-Store
(AS) tuning is not in effect, LOC will disappear from the display
panel, and the radio will stop at a wider range of signals, including
weaker (more distant) stations.
bn MONO/STEREO SELECTION (MO/ST)
During FM radio operation, this button is used to select mono or
stereo reception of the broadcast signal. Under normal
reception conditions, the unit should be left in the stereo mode
as indicated by the indication on the display panel when
tuned to an FM stereo signal. If the stereo signal is too noisy for
comfortable listening, press the MO/ST button to switch to
monaural reception (the indication will disappear from the
display). To return to stereo reception mode, press the button
again so that the indication reappears on the display.