Filter
Top Products
-6-
within 10 seconds of being ejected, it will automatically be re-loaded
into the unit to prevent damage ( will appear on the display
panel). Pressing the Disc Eject button again before removing
the disc will also re-load the disc into the unit.
cs TIME/FREQUENCY DISPLAY SELECTOR (T/F)
Press this button to call the time display on the incorporated quartz
clock. Press the button again to return to radio frequency or disc
display or it will return automatically after 5 seconds.
ct THEFT-DETERRENT LED
Located on the chassis behind the front panel, a light-emitting
diode (LED) will flash when the panel is removed. The flashing
light serves as a visual warning to the would-be thief that the unit
has been disabled by removal of the front panel.
cu RE-SET BUTTON
A Re-Set button is located on the chassis behind the front panel.
(Front panel must be removed to access the button). The re-set
circuitry is provided to protect the microprocessor circuitry and
should only be activated under the following circumstances.
1.Upon initial installation after all wiring is completed.
2.If there is a malfunction of any of the switches on the unit or of
the CD player, pressing the Re-Set button may clear the
system and return to normal operation.
dl FRONT PANEL RELEASE BUTTON ( )
This button is used to release the mechanism that holds the front
panel to the chassis. To detach the front panel, press the button
so that the left side of the panel is released. Grasp the released
side and pull it off of the chassis. To re-attach the panel, position
the right side of the panel in place first and then press the left
side of the panel until the mechanism locks it into place.
NOTES ON USE OF FRONT PANEL
1.Make sure the front panel is right-side-up when attaching it to the
chassis as it cannot be attached when up-side down.
2.Do not press very hard on the front panel when attaching it to the
chassis. No more than light to moderate pressure should be needed.
3.When attaching the front panel, make sure the right side is correctly
engaged before pressing the left side to lock it into position.
4.When taking the front panel with you, please use the supplied
carrying case to protect the panel from dirt and damage.
Engage right side first
ATTACHING THE FRONT PANEL
DETACHING THE FRONT PANEL
Release button