Filter
Top Products
128-6981
17 of 20
-17-
NOTE: The ID TAG can specify the Songname, Artist, Album, Year,
and/or Comments.
2. If no ID TAG is available, --NO ID3 will appear on the display follow-
ing Comments.
SELECTING THE TRACK NUMBER DIRECTLY
To select a desired track number directly, proceed as follows:
1. With the MP3 CD in the play mode, press the MP3 (AS/PS) button;
MP3 T appears on the display followed by a blinking asterisk
(
); then press the numeric key or combination thereof, to ac-
cess the appropriate track number.
2. If the desired track number consists of two digits or less, the player
will wait a few seconds for the ENTER (BAND/LOUD) button to be
pressed; otherwise, the player will begin searching for the track
automatically.
3. When the track is accessed, the track number appears on the
display, followed by the song name if this information is available.
ALPHANUMERIC SEARCH FOR A DIRECTORY OR FILE
To search for a desired directory or file on the MP3 CD, proceed as
follows:
1. With the MP3 CD in play mode, press the MP3 button until only a
blinking asterisk (
), denoting character position, appears.
2. Then press the desired buttons, or use the AUDIO ADJUST con-
trol with the SEL button, to enter the characters of the directory or
file name. Up to eight Alphanumeric characters can be entered for
search.
3. Press the ENTER (BAND/LOUD) button to select the the
directory/file name.
4. Press ENTER (BAND/LOUD) again to open the directory; ( .. ) will
be displayed, indicating that the directory is now open.
5. Then continue the search within the directory for the song title by
using the buttons, but use the
button first.
NOTE: If the Directory/File is entered incorrectly, or does not exist,
NOT FOUND will be displayed momentarily.
6. The contents (song titles, sub-directories) of the current
directory can now be accessed and selected for play. Navigate
the tracks using the
/ tuning buttons.
7. When the desired track title is accessed, press the ENTER
button again to begin play of the selected song.
NAVIGATING FROM A CURRENT DIRECTORY
To search for a desired song from the current directory on the MP3 CD,
proceed as follows:
1. With the MP3 CD in play mode, press the MP3 button until the
blinking asterisk (
) appears.
2. Then press the desired buttons, or use the AUDIO ADJUST con-
trol with the SEL button, to enter the characters of the directory or
file name. Up to eight Alphanumeric characters can be entered
for search.
3. Otherwise, continue the search within the directory for the song
title by using the
/ buttons, but use the but-
ton first.
4. When the song title is accessed, press ENTER again to begin
play of the selected song.
NOTE: The song Up/Down buttons ( / ) reflect
those on the radio front panel; however, these buttons
are slightly different on the Remote Control Unit and
appear as: (
/ ).