Filter
Top Products
-11-
REMOTE CONTROL PART NUMBER 136B2621
Power On/Off
Power On/Off
Press “PWR” button to turn the unit On/Off (same as Power
button on main unit).
Change Mode
Change Mode
Press the mode button to switch from AUX1, AUX2, or AUX3
(Same as Mode button on main unit.)
Using with Navigation System
Using with Navigation System
(
(
OPTION
OPTION
)
)
Connect with Navigation system and press “Navi” button.
Close the
Close the
Monitor When
Monitor When
the
the
Power is On
Power is On
When the monitor is opened(Power On condition), press “ , ” button on Remote
Controller to close the monitor.
When the monitor is closed(Power On condition), keep pressing button or “ , ” button
on Remote Controller longer than 2 sec to bend backward about 75 .
Press “ , ” button to bend the monitor backward by one step.
After adjusting monitor angle, press “ , ” button longer than 2 sec to memorize the
current monitor angle.
Once monitor angle is memorized, monitor will open to the memorized angle.
CONTROL
CONTROL
MENU
MENU
PWR
MODE
NAVI
POWER
-10-
ADDITIONAL FEATURE AND OPERATION
Press + hold the “DISP” button for more than
1second the display will switch into DIARY
mode.
Press the “MENU ” to select input mode.
Using the “CTRL ”, input the number on
the top right display.
Press the “ CTRL” button to decrease the input
number by 100.
(Keep pressing “ CTRL” button to decrease
rapidly by 1,000)
Press the “CTRL ” button to increase the input
number by 100.
(Keep pressing the “CTRL ” button to increase
rapidly by 1,000)
The maximum number of input is 999,999.
If there is no button pressed within 5 sec or the DISP button is pressed, the mode
will switch back to the previous mode.
“Diary” is the convenient feature so that user can make memo of the
milage required to change TRANSMISSION OIL, ENGINE OIL, BRAKE
PAD, ANTI-FREEZER, BELT, TIRE.
NOTE
Used to store milage reminders for engine service
Used to store milage reminders for engine service