Audiovox VOD10 Car Video System User Manual


 
MATERIALS INCLUDED IN THIS PACKAGE:
1) 10.2 TFT LCD Overhead Monitor With DVD Player - (1pc)
2) Hardware Package
Screws ISO M3 x 8mm Long - (5pcs)
#4 x 5/16" Self Drilling Screws - (1pc)
#4 x 7/16" Self Drilling Screws - (3pcs)
#8 x 3/8" Self Drilling Screws - (4pcs)
M5 Screws - (4pcs)
3) Remote Control (P/N 136-4840) - (1pc)
4) Universal Mounting Bracket (P/N 108-3921) - (1pc)
5) Pry Tool - (1pc)
6) Screw Cap - Shale - (2pcs)
- Pewter - (2pcs)
7) Trim Ring - Shale (P/N 102-4231) - (1pc)
- Pewter (P/N 102-4232) - (1pc)
8) Snap On Cover (Screen Back) - Shale (P/N 102-4233) - (1pc)
- Pewter (P/N 102-4234) - (1pc)
9) Snap On Cover (Shroud) - Shale (P/N 102-4235) - (1pc)
- Pewter (P/N 102-4236) - (1pc)
10) Wireless Headphones - (2pcs)
TOOLS REQUIRED:
#2 Phillips Screwdriver
#1 Phillips Screwdriver
Utility or Razor Knife or Shears
Wire Strippers
Upholstery hook tool (for removal of panels as necessary)
Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)
Marker pen – to mark headliner
Scribe (to mark trim ring if used)
Misc. electrical connectors (to connect to vehicle power source). Requirements will vary from vehicle to
vehicle)
DVD Movie (to verify system operation after installation)
M1 M2
POWER EJECT
TV DVD
SOURCE
MUTE
DVD SOURCE VOLUME
PIX
SYSTEM MENU DISC MENUZOOM
REPEAT
ENTER
SUBTITLE SETUPDISPLAY
AUDIO
1 2 3 4
5 6 7 8
9 0
IRT
ON/OFF
FMM
ON/OFF
1
2
3
4
5
6
7
8
9
10
3