Filter
Top Products
25
SOURCE FEATURE*
Video1
The Video 1 input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video devices. To access the
A/ inputs, turn the VOD128 on and press the S (source) button on the VOD128 or the Source button on the remote control until "VIDEO 1" is
displayed on the screen. Turn the video source component on with its power button or remote control. The VOD128 is now ready to play
the audio and video signals from the source connected to AV1 input ( .
Video 2
The Video 2 input may be connected to a Video Cassette Player (VCP), Video game system, any other audio / video device. To access the
A/V inputs, turn the VOD128 on and press the S (source) button on the VOD128 or the source button on the remote control until video 2 is
displayed on the screen.
Video 3
The VOD128 will accept audio / video input through the Smart port located on the rear of the unit. The audio / video device could be a
video game system, video camera, iPod (through iPod cable interface) or other input device.
Notes: 1. The AUX/Game input is a shared input 30-pin connector (Priority AUX); when an AUX input is connected, it will
automatically disable the game input.
2. Similarly, If an iPod is to be used, such as the Apple iPod 30, connect one end of the iPod adapter cable (purchased
separately) to the 30-pin AUX/Game connector on the VOD128, and connect the other end of the cable to the iPod
connector. The iPod adapter cable can be purchased from the vendor where the VOD128 was sold. When connected,
the game input is disabled.
Video Out
The VOD128 provides a video output for optional video monitor(s). This output will provide a video signal that duplicates the picture displayed
by the VOD128 to an additional monitor or video display. Please see your installer for more information.
*Note: Video 1 and Video 2 sources are available only if pre-installed during your video product installation.
optional accessory cable part number 8010730 required)