Filter
Top Products
27
SOURCE FEATURE*
VIDEO 1
The VIDEO 1 input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video devices. To access the A/V
inputs, turn the VOD128A on and press the S (source) button on the VOD128A or the Source button on the remote control until "VIDEO 1" is
displayed on the screen. Turn the video source component on with its power button or remote control. The VOD128A is now ready to play the
audio and video signals from the source connected to VIDEO 1 input ( .optional accessory cable part number 8010730 required)
VIDEO 2
The VIDEO 2 input may be connected to a Video Cassette Player (VCP), Video game system, any other audio / video device. To access the A/V
inputs, turn the VOD128A on and press the S (source) button on the VOD128A or the source button on the remote control until VIDEO 2 is
displayed on the screen.
Video Out
The VOD128A provides a video output for optional video monitor(s). This output will provide a video signal that duplicates the signal displayed
by the VOD128A to an additional monitor or video display. Please see your installer for more information.
*Note: VIDEO 1 and VIDEO 2 sources are available only if pre-installed during your video product installation.
VIDEO 3 (SMART PORT)
The VOD128A will accept audio / video input through the Smart port located on the rear of the unit. The audio / video device could be a video
game system, video camera, or other input device.
The AUX/Game input is a shared input 30-pin connector (Priority AUX); when an AUX input is connected, it will automatically
disable the game input.
Notes: