Audiovox VOH1041DL Car Video System User Manual


 
-10-
WIRED FM MODULATOR (P/N FMM100)
Your video system may be equipped with an optional
RF modulator (Audiovox FMM100), that allows you to
listen to the VOH1041DL’s audio signal by tuning
your vehicle’s radio to the selected frequency, (88.7
or 89.1- check with your installer) and turning on the
remote mounted RF modulator switch. (In mos
t
cases this toggle switch will be located underneath
the driver’s side of the dash, check with your installe
r
for the exact location.) Whenever the RF Modulato
r
is ON, broadcast radio reception will be poor.
Turning the remote mounted toggle switch OFF will
allow for normal radio reception.
VIDEO OUTPUT
The VOH1041DL provides a video output for an
optional Video monitor(s). This output will provide a
video signal that duplicates the signal displayed b
y
the VOH1041DL to an additional Monitor or Video
display. Please see your installer for more
information.
OPTIONAL ACCESSORIES
WIRELESS HEADPHONES
The VOH1041DL includes a built in Infrared
Transmitter for use with Audiovox Wireless
Headphones (P/N MVIRHS). Turning the Headphone
switch ON will activate the internal IR Receiver, the
volume can then be adjusted using the controls on
each headset. Any number of wireless headphones
can be used, but all must be within a line of sight from
the transmitter, as infrared transmissions, like visible
light travel only in a straight line.
The VOH1041DL has a Jack labeled “to FM
Transmitter”, this Jack is for connection of an optional
A
udiovox RF Transmitter (P/N WTXRF01). This
Transmitter is for use with the Audiovox Wireless RF
Headphones (P/N WHPRF01).
Consult the documentation accompanying the
Audiovox Wireless Headphones for more information.