Filter
Top Products
-19-
Figure 16. Tune Select Screen
This feature allows the user to store current program information
(Artist and Song title) for future comparison against the incoming
XM7 signal. The Xpress XM7 unit can hold up to 20 entries, after
which any new information saved will replace the oldest entry in
memory.
To store a song or artist, press and hold the Rotary/Select Knob or
the (XM) Select Button on the remote control until the unit emits a
confirmation tone. When the exact Artist or Song is detected on
the XM7 broadcast, the user will be notified via a confirmation
tone. An alert will also appear on the screen for approximately 8-
sec identifying that a match was found. Pressing the Rotary/
Select Knob or the (XM) Select Button on the remote control while
this screen is active forces the unit to jump to the station currently
playing desired Artist or Song.
Tune Select Erase All
To delete all songs from the Tune Select list go to menu options
then use the Rotary/Select Knob or the UP and DOWN buttons on
the remote control to choose
Figure 17. Tune Select Erase All Screen
Tune Select Erase Some
To delete individual and multiple artists/song titles from the Tune
Select list use the Rotary/Select Knob or the UP and DOWN
buttons on the remote control to choose the Artist name or Song
title (see Figure 18). Press the Rotary/Select Knob or the (XM)
Select Button on the remote to mark the Artist or Song title for
removal from the Tune Select list.
Press menu to delete marked items and exit the mode.
Figure 18. Tune Select Erase Some Screen
TUNE SELECT
“Yes or No” (see Figure 17). Press the Rotary/Select Knob or the
(XM) Select Button on the remote control to confirm the selection.