Filter
Top Products
15
8. If the antenna is mounted outside, route the cable from the
antenna position to the interior of the home, working the cable
through the basement, under a window sill, etc.; make
adjustments and take up slack whenever necessary.
9. Plug the antenna cable into the ANT IN connector on the back
of the cradle.
10. Plug the DC Adapter jack into the DC IN receptacle on the
cradle.
11. Plug the other end of the AC/DC wall adapter into 110-volt wall
receptacle; then press the Xpress XM Receiver Power button
(
) to energize the unit. You are now ready to enjoy XM
programming within your home.
Installation / Wiring Precautions