Filter
Top Products
AXIS M7001 Installation Guide Page 7
ENGLISH
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS M7001.
Automatic discovery
1. Check that the AXIS M7001 is connected to the network.
2. Start AXIS IP Utility.
3. When the AXIS M7001 appears in the window, double-click it to open its home page.
4. See page 9 for instructions on how to assign the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment as your computer.
2. Select the AXIS M7001 in the list.
3. Click the button Assign new IP address to selected device and enter the IP address.
4. Click the Assign button and follow the instructions.
5. Click the Home Page button to access the video encoder’s web pages.
6. See page 9 for instructions on how to set the password.