Filter
Top Products
MOUNTING LOCATION
Before you start the installation, it will be necessary to find a mounting location for
the amplifier. Find a location in which the amplifier will receive adequate
ventilation in order to dissipate the heat it develops during operation. Two popular
mounting locations are in the trunk or under the seat.
Select the location in which you wish to mount the amplifier. Use caution when
mounting amplifier, there are many wires, gas lines, vacuum lines, brake lines as
well as a gas tank in the automobile. Make sure you know where they are when
mounting the amplifier to avoid puncturing lines, shorting wires or drilling holes in
the gas tank. Once you are ready, use a pencil to mark the mounting holes in the
bottom panel. After you have marked the locations of the holes move amplifier out
of the way and drill small starter holes to make the tapping screws easier to install.
Use provided screws to tighten down the amplifier.
5
INPUT
CH1
CH2
CH4
CH3
FILTER
LOW
FLAT
HIGH
FILTER
LOW
FLAT
HIGH
LEVEL
MAX
MIN
LEVEL
MAX
MIN
POWER
PROTECT