Behringer B1220DSP Car Speaker User Manual


 
2
EUROLIVE B1220DSP
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
12) Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable.
13) Only use attachments/accessories specified by the
manufacturer.
14) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
15) Unplug this apparatus during lightning storms or when
unused for long periods of time.
16) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
17) CAUTION - These service instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than
that contained in the operation instructions unless you
are qualified to do so.
Important safety instructions
Caution:
To reduce the risk of electric shock, do not remove the top
cover (or the rear section). No user serviceable parts inside;
refer servicing to qualified personnel.
Warning:
To reduce the risk of fire or electric shock, do not expose
this appliance to rain and moisture. The apparatus shall not
be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the apparatus.
This symbol, wherever it appears, alerts you to
the presence of uninsulated dangerous voltage
inside the enclosurevoltage that may be
sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to
important operating and maintenance instructions
in the accompanying literature. Please read the
manual.
Ventilation:
The appliance should be situated so that its location or position
does not interfere with its proper ventilaton. For example, the
appliance should not be situated on a bed, sofa rug, or similar
surface that may block the ventilation openings or placed in a
built-in installation, such as a bookcase or cabinet that may
impede the flow of air.
Check the floor:
Always check the floor for stability before you set up the speaker
cabinet. Vibrating floors (e.g. elements/components on the
stage) do not provide reliable support for speaker stacks. So,
always place your speakers on a stable and level surface.
Make sure that speaker cabinets are set up properly:
Set up your speaker cabinet at a distance to dance floors or
other audience areas, so as to avoid a speaker stack being
knocked over.