Filter
Top Products
Page 8 of 8
©2011 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which
may be suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00456
For service, support or more information contact the BEHRINGER location nearest you:
Europe Tel.: +49 2154 9206 4149
Fax: +49 2154 9206 4199
USA/Canada Tel.: +1 425 672 0816
Fax: +1 425 673 7647
Singapore Tel.: +65 6845 1800
Fax: +65 6214 0275
Australia Tel.: +61 03 9877 7170
Fax: +61 03 9877 7870
Japan Tel.: +81 3 5281 1180
Fax: +81 3 5281 1181
B815NEO
OUTPUT POWER
Low-frequency range
RMS @ 1% THD 800 W @ 8 Ω
Peak power 1200 W @ 8 Ω
High-frequency range
RMS @ 1% THD 50 W @ 8 Ω
Peak power 60 W @ 8 Ω
AUDIO INPUTS
XLR (servo-balanced) Channels 1 and 2
Sensitivity -40 dBu to +10 dBu
Input impedance 27 kΩ
Level control Channels 1 and 2
Input Trim –∞ to + 50 dB
Max. input level +22 dBu
AUDIO OUTPUTS
LINE OUT XLR, balanced
Output impedance 120 Ω
CONTROLS
Digital Signal Processor 24-bit xed-point Motorola
AD/DA converter 24-bit / 48 kHz
NOISE GATE variable (o to -30 dB < -45 dB)
TIMED TURNOFF switchable (3 min.)
CONTOUR switchable SPEECH / MUSIC contour
HIGH 12 kHz / ±15 dB
LOW 80 Hz / ±15 dB
LOW CUT hi-pass lter, 40 - 160 Hz
(24 dB / Oct.)
LOUDSPEAKER SYSTEM DATA
Frequency response 40 Hz to 20 kHz
Crossover frequency 1.54 kHz
Sound pressure level max. 128 dB SPL @ 1 m
Tweeter 1.75" / 44 mm, neodymium
titanium-diaphragm HF driver
Woofer 15" / 387 mm
neodymium LF transducer
Limiter Optical, dual protection for woofer
and driver
Dynamic equalizer Processor-controlled, dual parametric EQs
POWER SUPPLY / VOLTAGE FUSES
USA / Canada 120 V~, 60 Hz (T 10 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 5.0 A H 250 V)
Europe 230 V~, 50 Hz (T 5.0 A H 250 V)
Japan 100 V~, 50-60 Hz (T 10 A H 250 V)
Power consumption max. 1000 Watts
Mains connection Standard IEC connector
DIMENSIONS/WEIGHT
Dimensions (HxWxD) 29 x 17 x 18.5"/735 x 430 x 470 mm
Weight 51.1 lbs/23.18 kg
Please note these speci cations are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not to be
made public in any manner. This document is solely the property of The MUSIC
Group, or one of its subsidiaries, and must be surrendered upon request of
the owner.
B912NEO/B812NEO
OUTPUT POWER
Low-frequency range
RMS @ 1% THD 800 W @ 8 Ω
Peak power 1200 W @ 8 Ω
High-frequency range
RMS @ 1% THD 50 W @ 8 Ω
Peak power 60 W @ 8 Ω
AUDIO INPUTS
XLR (servo-balanced) Channels 1 and 2
Sensitivity -40 dBu to +10 dBu
Input impedance 27 kΩ
Level control Channels 1 and 2
Input Trim –∞ to + 50 dB
Max. input level +22 dBu
AUDIO OUTPUTS
LINE OUT XLR, balanced
Output impedance 120 Ω
CONTROLS
Digital Signal Processor 24-bit xed-point Motorola
AD/DA converter 24-bit / 48 kHz
NOISE GATE variable (o to -30 dB < -45 dB)
TIMED TURNOFF switchable (3 min.)
CONTOUR switchable SPEECH / MUSIC contour
HIGH 12 kHz / ±15 dB
LOW 80 Hz / ±15 dB
LOW CUT hi-pass lter, 40 - 160 Hz
(24 dB / Oct.)
LOUDSPEAKER SYSTEM DATA
Frequency response 45 Hz to 20 kHz
Crossover frequency 1.54 kHz
Sound pressure level max. 127 dB SPL @ 1 m
Tweeter 1.75" / 44 mm, neodymium
titanium-diaphragm HF driver
Woofer 12" / 308 mm neodymium
LF transducer
Limiter Optical, dual protection for woofer
and driver
Dynamic equalizer Processor-controlled,
dual parametric EQs
POWER SUPPLY / VOLTAGE FUSES
USA / Canada 120 V~, 60 Hz (T 10 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 5.0 A H 250 V)
Europe 230 V~, 50 Hz (T 5.0 A H 250 V)
Japan 100 V~, 50-60 Hz (T 10 A H 250 V)
Power consumption max. 1000 Watts
Mains connection Standard IEC connector
DIMENSIONS/WEIGHT
Dimensions (HxWxD) 26 x 15 x 15.5"/660 x 380 x 395 mm
Weight 42 lbs/19 kg
EUROLIVE
B912NEO
B815NEO
B812NEO