FX Function PAR 1 control
Chorus Eects speed
Flanger Eects speed
Phaser Eects speed
Delay Delay time
Tremolo Eects speed
Pitch Shifter
Detune
(slight shifting for fatter sound)
FX Function PAR 2 control
Chorus Eects depth
Flanger Eects depth
Phaser Eects depth
Delay Delay feedback
Tremolo Shape (LFO waveform)
Pitch Shifter Semi tone (pitch interval)
DIGITAL MULTI-FX FX600
Digital Stereo Multi-Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER DIGITAL MULTI-FX FX600.
This ultimate digital multi-eects pedal delivers 24-bit high-resolution stereo eects including Flanger,
Chorus, Phaser, Delay, Tremolo and Pitch Shifter. Thanks to its extensive tone control plus additional multi-
functional parameter adjustment you’ll have plenty of cool sounds at your disposal to handle every situation.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) and (3) The PAR 1 and 2 controls have dierent functions depending on the chosen eect.
(1)
(4)
(6)
(8) (7)
(5)
(2) (3)
(4) The FX control lets you chose between six dierent modulation eects:
CHORUS: This eect slightly detunes the original signal. A very pleasant detune eect is created in
connection with the pitch variation.
FLANGER: Originally, the anger eect was generated with two tape recorders running
synchronously. The same audio signal was recorded on both machines. If you put a nger on
the left spool of one of the machines, the spool and the playback speed are slowed down.
The generated delay results in phase shifting of the signals.
PHASER: With the phaser, a second, phase-shifted signal is added to the original audio signal.
The resulting sound is thicker and above all livelier.
PITCH SHIFTER: The pitch shifter slightly detunes the audio signal.
TREMOLO: The tremolo eect is achieved by periodic modulation of the input signal level. This results
in a continuous change from low to high level that lends a quivering, tremulous sound character.
DELAY: A delay of the input signal with various repetitions.
(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use the two ¼" TS connectors IN A and IN B to plug in a stereo input signal. For mono use just
plug in IN A.