Filter
Top Products
6 DIGITAL MONITOR SPEAKERS MS40/MS20 User Manual
(15)
(8) (9)
(10) (11)
(13)(12) (14)
Fig. 2.2: Rear panel (right monitor)
(8) Digital audio data can be fed in at the OPTICAL input.
(9) The MS40 also features a digital COAXIAL input connector.
(10) With this switch you can select the digital input (OPTICAL or COAXIAL).
(11) SERIAL NUMBER.
(12) Analog input LINE 1 (⁄" TRS) allows you to connect stereo audio equipment
such as CD/MD players.
(13) Use the analog input LINE 2 (RCA) to connect your sound card,
keyboard or expander.
◊ You can play back various signals by using both stereo
inputs simultaneously.
(14) TO LEFT SPEAKER output connector. Connect both speakers by using the
speaker cable included in this package. As soon as both speakers are properly
connected, they will function as a stereo speaker system.
(15) A standard power socket is provided for connection to the mains. A matching
power cable is included with the unit. Before you connect the unit to the
power source make sure that the power switch is turned o and the volume
controls are turned all the way to the left to avoid any damage to speakers or
other devices.
(16)
Fig. 2.3: Rear panel (left monitor)
(16) FROM RIGHT SPEAKER connector. Insert the speaker cable from the
TO LEFT SPEAKER connector.
3. Wiring
The DIGITAL MONITOR SPEAKERS MS20/MS40 are designed to acco m modate a
variety of connector types for almost any situation you may encounter.
You will nd all audio inputs on the right speaker. The left speaker only has one
audio input which is fed from the right speaker.
◊ Be sure to mute the signal sources before you put the monitor speakers
into operation.
Digital Audio
Workstation
Digital input
(coaxial)
Digital input
(optical)
Speaker cable
MS40
(left)
Keyboard
Headphone
BEHRINGER
HPS3000
MS40
(right)
Analog inputs (RCA)
MD player
Fig. 3.1: Computer/keyboard setup
Begin by connecting the left speaker to the right speaker by wiring the attached
speaker cable from connector (14) to connector (16) on the left speaker.
Connect the analog outputs of your mixer, keyboard or computer sound card to
LINE 1 input (12). Connect a second piece of equipment to LINE 2 inputs (13).
If you own equipment with digital connectors—such as CD or MD players—
simply connect them to the digital inputs (8) and (9). Select the digital signal
you want to monitor with the input selector switch (10).
You can mix two input signals within the MS20/MS40 by using the volume
controls (6) and (7). This enables you to monitor two dierent sound sources
simultaneously. The above wiring example shows how you can monitor your live
keyboard performance to a playback coming from your MD player or digital audio
workstation (computer).
The MS20/MS40 speakers are shielded, which allows you to place them near your
computer monitor without causing interference or damage. However, do not
place your MS20/MS40 speakers near power amps. Doing so will result in an
induced hum in your speakers.