Filter
Top Products
Page 2 of 11
Front panel LCD display enables
setup and adjustment without PC
Can be set up, controlled and
monitored via front panel USB
connector. Powerful remote software
downloadable at behringer.com
“Zero-Attack” limiters oer
maximum output level with
reliable overload protection
Built-in Subwoofer/Satellite
crossover for perfect
subwoofer operation
Detented and illuminated gain
controls for precise level setting
Precise 4-segment Signal and Limit
LEDs to monitor performance
XLR and ¼'' TRS combination input
connectors for compatibility with
any source
Professional twist-lock speaker
connectors for ultimate reliability
Independent DC, LF and thermal
overload protection on each channel
automatically protects amplier
and speakers without shutting down
the show
“Back-to-front” ventilation system
prevents thermal buildup for
reliable operation
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
The rear panel is just as elegant,
with combo XLR and ¼" TRS input
connectors making the iNUKE compatible
with virtually any source, balanced or
unbalanced. Professional twist-lock
speaker sockets are provided to ensure
every drop of output power gets to
your loudspeakers. The rear panel is
also where you’ll nd the switches that
enable iNUKE amps to work in either
dual mono, stereo or mono bridge
mode. A built-in CROSSOVER switch
enables the amp to operate in biamp
mode, sending low frequency content
to passive subwoofers, while the high
frequency output is channeled to
fullrange loudspeakers (CH1>100 Hz /
CH2<100 Hz or FULLRANGE).
iNUKE DSP
For sound engineers requiring
high-level control capability, iNUKE DSP
Series ampliers come ready for action
right out-of-the-box. The built-in DSP
and 24-bit/96 kHz converters ensure the
ultimate signal integrity with an extremely
broad dynamic range. DSP functions
include a sophisticated delay for
delay-line loudspeakers, crossover,
EQ (eight parametric, two dynamic),
and dynamics processing with lockable
security settings. A convenient front
panel LCD display allows you to setup
and make adjustments directly at the
amplier, without the need for a PC.
All iNUKE DSP models can be set up,
controlled and monitored via the front
panel USB connector.
GAIN CONTROLS
adjust input level Power button
Front Panel
iNUKE NU6000/NU3000/NU1000
TWIST-LOCKING
SPEAKER OUTPUTS
accept professional
speaker cables
Power Connection
INPUTS connect
sound source using
¼" TRS / XLR
combo jacks
MODE switches selects
dual-mono, stereo
or bridged mono
operating modes
Rear Panel
Continued on next page
iNUKE NU6000DSP
NU3000DSP
NU1000DSP
NU6000
NU3000
NU1000