Filter
Top Products
6
AirCast Auto
SECTIONSTable of Contents 1 2 654 7
DAILY USE
3
Managing Phone Calls
Make a call:
• Place calls as you normally do on your phone and the call audio
will be heard through your car stereo.
Make a call using voice-dialing:
• If your phone supports voice-dialing, press and hold the button
until you hear your phone prompt for a command (about one
second).
Answer a call:
• When an incoming call is detected, the light ring will flash blue.
• Tap the button to answer the call and the light ring will return to
solid blue.
Connecting
To connect to the AirCast Auto:
1. If you’re already on a call or listening to music via a Bluetooth
®
headset, turn the headset off so that your phone is free to connect
to the AirCast Auto.
2. Turn your car stereo on and set the input source to AUX.
3. Make sure there’s power to the AirCast Auto—the light ring will be
solid orange.
4. Tap the button and the AirCast Auto will attempt to re-connect with
the same phone it last connected to.
5. When successfully connected, the light ring will turn solid blue.
6. If you’re already on a call or listening to music, the audio will
transfer to your car speakers.
Note: After 10 minutes of inactivity, the AirCast Auto will go into
sleep mode and the light ring will turn off. When that happens, tap
the button to wake it and it will immediately attempt to connect to
the same phone it last connected to.