Filter
Top Products
BenQ LCD Color Monitor User's Guide
English 30
C. Refresh Rate Selection
There is no need to choose the highest possible refresh rate on a LC display. It is not technically
possible for an LC display to flicker. Even at a refresh rate of 60 Hz you will get an absolutely flicker-
free image. More important is that you make sure that you use one of the factory modes. In con-
trast to a modern CRT monitor, which is a multiscan monitor, the LC display is a multi-frequency
monitor. This means, the best results are only obtained by using the factory modes. You will find a
table with the factory modes in this user's guide. For the native resolution of 1024x768, these, for
example, are 60, 70 and 75 Hertz, not 72 Hz; however, in Windows 95/ 98/ 2000 you can change
the refresh rate as follows:
1. Double click the “Display” icon in the Control Panel.
2. From the “Display Properties” window, select the “Settings” tab. Click the “Advanced...”
button in the bottom right corner.