Blaupunkt 400 BT Car Stereo System User Manual


 
36
CD/MP3/WMA/C‘n‘C/CD changer mode
Blaupunkt cannot guarantee the fl awless
function of copy-protected CDs and all CD
blanks and USB data carriers available on
the market.
Note the following information when preparing an
MP3/WMA data carrier:
Naming of tracks and directories:
Max. 16 characters (CD) or 24 charac-
ters (USB) incl. the fi le extension ".mp3"
or ".wma" (if more characters are used,
the number of tracks and folders that are
recognisable by the car sound system is
reduced)
No umlauts or special characters
CD formats: Audio CD (CDDA), CD-R/RW,
Ø: 12 cm
CD data formats: ISO 9669 Level 1 and 2,
Joliet
CD burn speed: Max. 16x (recommended)
USB format/fi le system: Mass storage device/
FAT32
File extension of audio fi les:
.MP3 for MP3 fi les
.WMA for WMA fi les
WMA fi les only without Digital Rights Manage-
ment (DRM) and created with Windows Media
Player version 8 or later
MP3 ID3 tags: Version 1 and 2
Bitrate for creating audio fi les:
MP3: 32 to 320 kbps
WMA: 32 to 192 kbps
Max. number of tracks: 20,000
C‘n‘C mode
The C'n'C interface from Blaupunkt (C'n'C = Com-
mand and Control) allows an even more conven-
ient control of devices and data carriers that are
connected to the car sound system via a C'n'C-
ready Blaupunkt interface.
Before connecting a C'n'C-ready Blaupunkt inter-
face, check the mode of the rear AUX input. For
further details, please read the section "Rear AUX
input" in the chapter "External audio sources".
CD changer mode
You can connect the following CD changers to the
car sound system:
Blaupunkt CDC A03
Blaupunkt CDC A08
Blaupunkt IDC A09
Information on handling CDs, inserting CDs and
operating the CD changer can be found in the
operating instructions supplied with your CD
changer.
Before connecting a CD changer, check the mode
of the rear AUX input. For further details, please
read the section "Rear AUX input" in the chapter
"External audio sources".
Changing to CD/MP3/WMA/C‘n‘C/
CD changer mode
Press the SRC button 6 repeatedly until
the desired audio source is displayed:
"CD": Inserted CD.
"MP3": Inserted CD that has already been
recognised as MP3 CD.
"USB": Connected USB data carrier.
Name of the device connected via C‘n‘C
"CDC / AUX": Connected CD changer (if no
other external audio source is connected).
Notes:
The respective audio source can be select-
ed only if a corresponding CD is inserted or
a corresponding device (e.g. a USB data
carrier or CD changer) is connected.
If the car sound system fi rst has to read
the data of a connected device or data car-
rier before the playback, the display shows
"READING". For large data volumes, this
may take up to 1 minute. If the device or
data carrier is defective or the transferred
data cannot be played back, a correspond-
ing message appears on the display (e.g.
"ERROR" or "USB ERROR").
u
02_Toronto400BT_gb.indd 3602_Toronto400BT_gb.indd 36 03.02.2009 16:04:22 Uhr03.02.2009 16:04:22 Uhr