Filter
Top Products
34
Radio mode
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
among Europe (EUROPE), America (USA),
South America (S-AMERICA), and Thailand
(THAI). The tuner is factory-set to the re-
gion in which it was sold. If you experience
problems with your radio reception, please
check this setting.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting EUROPE.
Switch off the device by pressing but-
ton 2.
Hold the buttons 1 and 5 < pressed at
the same time and switch on the device
again with the button 2.
"TUNER" is displayed.
Select your tuner region with the
or
button 6.
To save the setting,
switch the device off and on again or
wait approx. 8 seconds. The radio
starts playing with the last setting se-
lected (radio, CD, CD changer or AUX).
Switching to radio mode
If you are in CD, CD changer or AUX mode,
press the BND/TS ? button
or
press the SRC/
button > repeated-
ly until the memory bank, e.g. "FM1",
appears on the display.
A border appears around the radio symbol.
u
u
u
u
u
u
Convenient RDS functions
This device is equipped with an RDS radio
receiver (Radio Data System). Many of the
receivable FM stations broadcast a signal
that not only carries the programme but
also additional information such as the sta-
tion name and programme type (PTY).
The station name appears on the display as
soon as the tuner receives it.
The convenient RDS functions AF
(Alternative Frequency) and REGIONAL ex-
tend your radio’s range of functions.
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
REGIONAL: At certain times, some ra-
dio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
Note:
REGIONAL must be activated/deacti-
vated separately in the menu.
Switching the RDS function on/off
If you want to use the RDS functions (AF
and REGIONAL),
press and hold down the TRAF = but-
ton for longer than two seconds.
The RDS function is active if the RDS sym-
bol appears on the display.
•
•
u
Radio mode
02MadeiraPortoCD27_gb.indd 3402MadeiraPortoCD27_gb.indd 34 26.10.2006 16:08:39 Uhr26.10.2006 16:08:39 Uhr