Blaupunkt 800 Car Stereo System User Manual


 
18
External audio/video sources
This device features two external AV inputs for audio and
video playback:
AV-IN 1 is located under the cover at the front of the
device.
AV-IN 2 is implemented as a cinch socket on a cable
at the rear of the device. You can specify the instal-
lation location of the port during the installation of
the device.
Danger!
Increased risk of injury from connector.
In case of an accident, the protruding connec-
tor in the front AV-IN socket may cause injuries. The use
of straight plugs or adapters leads to an increased risk
of injury.
u Start the AV-IN mode with the button AV-IN 1 or AV-
IN 2.
The display shows the audio or video playback of the
selected AV source.
External audio/video sources | Sound settings
Sound settings
Volume distribution (fader/balance)
You can adjust the volume distribution in the vehicle
for all sources.
u In the main menu, press the
button.
The equalizer menu is displayed.
u Press the
button.
The menu for fader and balance is displayed.
u Adjust fader and balance with / or
/ .
u Next press on Equalizer.
The setting is stored, the main menu is displayed
again.
Equalizer
You can adjust the equalizer for all sources.
u In the main menu, press the
button.
The equalizer menu is displayed.
u Select a preset equalizer with or .
- Or -
u Use
or to adjust the level for Bass, Mid and
Treble as well as the frequency of the LPF, MPF and
HPF  lters according to your needs.
u Next press on Equalizer.
The setting is stored, the main menu is displayed
again.