Filter
Top Products
ACR 4230
12
Storing stations
For each memory bank (I, II, III, T) you can
store up to five stations using the button 1-5.
• Select the memory bank by pressing
FM•T.
• Select the button 1-5 to store the new
station and press it.
• Press
to tune in the station you
want to store (automatically or manual-
ly).
• Press the button 1-5 and hold it. First
the station will be muted and then be-
come audible again.
The station has been stored in the memory
bank.
The corresponding memory bank and the
button preset will appear in the display.
Note:
If you tune into a station which has already
been stored, then the corresponding button
preset and the memory bank will flash in the
display for approximately 5 seconds.
Storing the strongest stations
automatically
(Travelstore)
In your reception area you can automatically
store the five nearest FM stations, sorted
according to their frequencies.
This feature is particularly useful when you
are travelling.
• Press FM•T for at least 2 seconds.
The radio will search for the nearest FM
stations and store them in the memory
bank “T” (Travelstore). When the pro-
cess has been completed, the first stati-
on will be set.
If you wish, you can also store stations in the
Travelstore memory bank manually.
Recalling stored stations
You can recall the stored stations by pressing
the corresponding buttons.
• Select the memory bank.
Press FM•T until I, II, III or T appears in
the display.
• Select the station by pressing the but-
ton 1-5, press repeatedly if necessary.
Traffic messages (ARI)
Many FM stations broadcast traffic news for
their reception area at regular intervals. Sta-
tions using the ARI system broadcast an “ARI
signal” during their programmes, so that your
car radio can recognize them. Another signal
is broadcast to indicate the beginning and
end of a traffic message. These traffic mes-
sages are broadcast at a preset volume. If
you are playing a cassette, it will be interrup-
ted until the traffic message has ended and
will then resume operation.
Switching the traffic messages (ARI) on
and off
If you want to switch the reception of traffic
messages (ARI) on or off
• Press ARI.
ARI will light up in the display, when the
reception is switched on.
Now the radio will only pick up those stations
broadcasting the ARI signal.
Warning beep
Should you leave the reception area of the
station you are tuned to, then you will hear a
warning beep after approximately 30 se-
conds. If you should press a button preset for
a station which does not broadcast the ARI
signal, then you will also hear a warning
beep.