Filter
Top Products
19
ACM 3250 GB
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
When holding the or button down, the
frequency scan is speeded up.
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
sensitivity.
For this,
• press the lo·m button briefly.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also pick
up weaker, distant stations (high sensitivity).
Make sure that “m” is not indicated in the
display.
Switching from stereo to mono
(FM)
If reception is poor, you may get better sound
quality by switching to mono:
• Press the lo·m button until a beep
sound is released and the stereo sign
disappears from the display.
Each time the radio is switched on, stereo
playback is activated (
is displayed).
The unit will automatically switch to mono if
the received signal is not strong enough for
stereo playback.
Changing the memory bank
You can shift between the memory banks I,
II and T in order to store stations and recall
them later.
The currently selected memory bank is indi-
cated in the display.
• Toggle the FM button until the desired
memory bank lights up in the display.
Storing stations
On FM, you can store six stations on the
preset buttons 1-6 for each of the memory
banks I, II and T.
• Select the memory bank with the FM
button.
• Select the desired preset button (1 to
6) for the new station to be stored
using preset buttons 1-6.
• Tune into a station either automatically
or manually by pressing
or .
• Press the desired preset button 1-6
until the radio resumes play after the
muting and you hear the beep.
Now the station has been stored.
The activated preset button 1-6 is indicated
in the display.
Note:
If you tune into an already stored station, the
corresponding memory bank and preset but-
ton flash in the display for approximately 6
seconds.
Automatically storing the
strong-est stations with Travel-
store
You can automatically store the six most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength.
This function is particularly convenient on
longer trips.
• Press the TS button briefly.
The radio will search for the strongest FM
stations and store them on the memory bank
“T” (Travelstore). When this process has
been completed, the radio will play the first
station.
If desired, stations can also be stored manu-
ally on the Travelstore bank (see “Storing
stations”).