Filter
Top Products
35
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Setting the scantime
➮ Press the MENU button :.
➮ Keep pressing the or button
9 until “SCANTIME” appears in
the display.
➮ Set the required scantime using
the
and buttons 9.
When you have finished making your
changes,
➮ press the MENU button : twice.
Note:
● The set scantime also applies to
scanning in CD and CD changer
mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting.
For example, the programme types can
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK MUSIC
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Note:
● If no station is found that corre-
sponds to the selected programme
type, you will hear a beep and “NO
PTY” appears briefly in the display.
The station that was listened to last
will then be tuned into again.
● If the tuned radio station or another
station on the broadcasting net-
work broadcasts the required pro-
gramme type at a later point in
time, the radio automatically
switches from the currently tuned
station or from CD mode / CD
changer mode to the station whose
programme type matches the one
you selected.
Switching PTY on/off
➮ Keep the TRAF (PTY) button <
pressed until “PTY” appears in or
disappears from the display.
The programme type appears briefly in
the display when you switch PTY on.
Selecting a programme type and
starting seek tuning
➮ Press the or button 9.
The current programme type appears
in the display.
➮ If you want to select another pro-
gramme type, you can do so by
pressing the
or button 9
whilst in this display.
Or
➮ Press one of the buttons 1 - 5 ; to
select a programme type that is
stored on one of these buttons.
RADIO MODE