Filter
Top Products
49
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
CD changer operation
(optional)
The Blaupunkt IDC A09 CD changer is in-
cluded with the Arizona DJ70.
The Blaupunkt CDC A08 CD changer is in-
cluded with the Missouri DJ70 and the Wash-
ington DJ70.
CD changers can be obtained as accessories
for the Madrid C70 and Milano C70. On page
33 of this guide you can find which CD chang-
ers can be used. You can also refer to your
Blaupunkt dealer.
Note:
The operating instructions for your CD chang-
er will provide information about handling
CDs, inserting them and operating the CD
changer.
Starting CD changer operation
➮ Press the CDC button, =.
The CD changer menu is displayed, and play
will continue from the point where it was last
interrupted. If the magazine is removed from
the CD changer and re-inserted, play will start
with the first track on the first CD detected by
the CD changer.
Selecting a CD
➮ In order to change up or down to anoth-
er CD, press the
or button, 7, until
the number of the CD you want appears
on the display.
Selecting a track
➮ In order to change up or down to anoth-
er track on the current CD, press the
or button, 7, until the number of the
track you want appears on the display.
If the button, 7, is pressed once the cur-
rent track is started again.
Fast searching (audible)
In order to search rapidly backwards or for-
wards
➮ hold down one of the or buttons,
7, until the fast search backwards of
forwards starts.
Changing the display contents
You can choose between different display
modes during CD changer operation:
● Display of CD number, track number
and time.
● Display of CD number, track number
and playing time.
● Display of CD name and track number.
➮ In order to change between the display
modes, press the DIS button, :, as of-
ten as you need for the desired informa-
tion to be shown on the display.
Note:
It is only possible for a CD name to be dis-
played if the inserted CD has been provided
with a name. Read the section on “Naming
CDs”.
Repeat play of individual tracks or
whole CDs (REPEAT)
➮ Press the softkey, 4, indicating “RPT”.
“RPT TRCK” appears briefly on the display.
➮ In order to repeat play of the whole CD,
press the softkey, 4, indicating “RPT”
again.
“RPT DISC” appears briefly on the display.
Stopping REPEAT
In order to stop repeating either the current
track or the current CD
➮ press the softkey, 4, indicating “RPT” as
often as necessary for the “RPT OFF” to
be shown in the display.
CD CHANGER OPERATION