Filter
Top Products
45
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching the equalizer on/off
➮ To switch the equalizer on, press
and hold down EQ < until EQ
lights up in the display and “EQ
ON” appears briefly.
➮ To switch the equalizer off, press
and hold down EQ < until EQ no
longer lights up in the display and
“EQ OFF” appears briefly.
Adjusting the equalizer
➮ Press EQ <.
“LOW EQ” will appear in the display.
➮ Press or : to select either
“LOW EQ” or “HIGH EQ”.
➮ Press or : to adjust the
gain.
➮ Press or : to select the fre-
quency range.
➮ To select the next frequency, press
OK ; first and then :.
➮ Once you have completed making
all of the necessary adjustments,
press EQ <.
Equalizer
This car audio system is equipped with
a parametric 2-band equalizer. For
“LOW EQ” the gain can be set to a fre-
quency between 60 to 100 Hz. For
“HIGH EQ” the gain can be set to a fre-
quency between 10000 and 17500 Hz.
As a result, it is possible to significantly
influence the in-vehicle acoustics.
Notes on making equalizer
settings
We recommend that you use a cassette
or CD (if a CD changer is connected)
you are familiar with to make the set-
tings.
Before you set the equaliser, set bass,
treble, balance and fader to “0” and de-
activate the Loudness function. For
more information on how to do this, re-
fer to the section on “Tone and balance/
fader”.
➮ Now listen to the cassette or CD
you have selected.
➮ Evaluate the sound according to
your own personal preferences.
➮ Now refer to “Sound impression” in
the following table.
➮ Make the settings for the equalizer
as described under “What to do”.
EQUALIZER