Filter
Top Products
17
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
Audio and volume
distribution settings
Bass settings
➮ To set the bass, press the AUD
button =.
“BASS” appears in the display.
➮ Press the or button : to
adjust the bass.
Treble settings
➮ To set the treble, press the AUD
button =.
“BASS” appears in the display.
➮ Press the button : until
“TREBLE” appears in the display.
➮ Press the or button : to
adjust the treble.
Balance settings
➮ To set the balance, press the AUD
button =.
“BASS” appears in the display.
➮ Press the button : until
“BALANCE” appears in the display.
➮ Press the or button : to
adjust the balance.
Fader settings
➮ To set the fader, press the AUD
button =.
“BASS” appears in the display.
➮ Press the button : until
“FADER” appears in the display.
➮ Press the or button : to
adjust the fader.
Switching loudness on/off
If loudness is activated, the bass and
treble levels are aurally compensated,
i.e. they are increased at lower volume
levels.
➮ Press the AUD (LD) button = for
approximately 1 second.
LD lights up in the display when loud-
ness is switched on.
Setting loudness intensity
The loudness level can be set in steps
ranging from 1 to 6.
➮ Press the MENU button 8.
➮ Keep pressing the button :
until “LOUDNESS” appears in the
display.
➮ Press the or button : to set
the level.
➮ When you have finished making
your changes, press the MENU
button 8 or OK ;.
AUDIO SETTINGS AND VOLUME DISTRIBUTION