Filter
Top Products
13
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Cassette tape operation
Insert cassette tape
• Switch the car radio on.
• Insert a cassette tape with the empty
reel facing forward and the open side
facing to the left.
Tape playback will begin.
When the tape has run to the end, the car
radio will switch on automatically.
Remove cassette tape
• Press FF / Eject firmly.
The cassette will be ejected.
Fast forward
To begin and end fast forwarding,
• Press FF / Eject gently.
Switching the warning beep off
a) Tune to a different station broadcasting
the ARI signal:
• Press or
• select a stored station with the ARI
signal by pressing the button preset
1-5.
or
b) Switch the traffic message priority off:
• Press ARI.
Automatic search start
(during cassette operation)
If you should leave the reception area of your
ARI station while you are playing a cassette,
then the car radio will automatically tune into
a different station broadcasting the ARI si-
gnal.
Care of your audio equipment
We recommend that you use only C60/C90
cassette tapes in your car radio. Protect your
cassettes from dirt, dust and temperatures
exceeding 50 °C. During cold weather, allow
cold cassettes to warm up somewhat before
playing them in order to avoid uneven tape
transport. Operating problems and sound
distortions may occur after approximately
100 hours of playing time and are caused by
dust particles which adhere to the rubber
roller pad and the tape head. Use a cleaner
cassette to remove normal dirt build-up. If
more dirt than usual has accumulated, use a
cotton bud dipped in rubbing alcohol to clean
these parts. Never use any hard tools.