Blaupunkt CD35 7 645 050 510 Car Stereo System User Manual


 
40
Cancelling SCAN
To stop scanning,
briefly press the MENU button 8.
The currently scanned track will then
continue to be played normally.
Note:
You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Pausing playback (PAUSE)
Press button 3 :.
“PAUSE” appears in the display.
Cancelling pause
Press button 3 : whilst pause
is activated.
Playback is resumed.
CLOCK time
Displaying the clock time
To display the clock time briefly,
Press and hold down the SRC
button 2 until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
press the MENU button 8.
Press the or button 7 repeat-
edly until “CLOCK SET” appears in
the display.
Press the button 7.
The clock time appears in the display.
The hours flash and can be adjusted.
Adjust the hours using the / but-
tons 7.
Once the hours are set,
press the button 7.
The minutes flash.
Adjust the minutes using the /
buttons 7.
Press the MENU button 8 twice.
Selecting 12/24-hour clock
mode
Press the MENU button 8.
“MENU” appears in the display.
Press the or button 7 repeat-
edly until “24 H MODE” or “12 H
MODE” appears in the display.
Press the or button 7 to
switch between the modes.
CD-CHANGER MODE
CLOCK TIME