Filter
Top Products
10
Adjusting the volume of the
beep
For a number of functions you will hear
a beep if you press a key for longer than
2 seconds, e.g. if you want to store a
radio station on a station preset. You can
adjust the volume level of this beep.
➮ Press MENU 8.
➮ Press : repeatedly until
“BEEP” appears in the display.
➮ Press : to adjust the vol-
ume. “0” means the beep volume is
off, “9” means the beep volume is
adjusted to the maximum volume.
➮ Once you have adjusted the set-
tings, press MENU 8 or OK ;.
Radio operation
Switching to the radio mode
If you are currently using the CD player
or CD changer,
➮ press CD•C @ repeatedly until
“RADIO” appears in the display.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM and
AM wavebands. There are three mem-
ory banks for the FM waveband and one
memory bank for AM.
You can store six stations in each of
these memory banks.
➮ To switch between the different FM
memory banks , press FM 4.
➮ To select the AM waveband, press
AM 5.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
Automatic seek tuning
➮ Press or :.
The radio will tune into the next availa-
ble station within reception range.
Manual station selection
You can also tune into radio stations
manually.
➮ Press or :.
RADIO OPERATIONVOLUME CONTROL