Filter
Top Products
52
Adjusting the spectrometer
The spectrometer in the display uses
symbols to temporarily indicate what
adjustments are made to the volume,
the tone and balance/fader and the
equalizer settings.
If no adjustments are being made to the
system, the spectrometer displays the
output level of the car radio.
You can select the type of spectrome-
ter you want displayed in the menu.
There are two different types available.
Selecting the spectrometer type
➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “EQ
DISPLAY” appears in the display.
➮ Press or : to select either
“SPECTRUM 1”, “SPECTRUM 2”
or “EQ DISP OFF”.
➮ Once you have completed adjust-
ing the settings, press MENU 8 or
OK ;.
External audio sources
In addition to the CD changer it is also
possible to connect another external au-
dio source to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
If you have not connected a CD chang-
er, it is possible to connect two external
audio sources.
You must activate the AUX output in the
menu.
If you would like to connect another ex-
ternal audio source, you will require an
adapter cable. This adapter cable can
be ordered from any authorized Blau-
punkt dealer.
Switching the AUX output on/off
➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “AUX-
IN-1 OFF” or “AUX-IN-1 ON” ap-
pears in the display.
In place of the “1”, there is a “2” for the
second AUX input. If you have connect-
ed a CD changer, then only AUX “2” can
be selected.
➮ Press or : to switch AUX on
or off.
➮ Once you have completed your
selections, press MENU 8 or
OK ;.
Note:
If the AUX input has been switched ON,
you can select it by pressing CD•C ?.
EXTERNAL AUDIO SOURCESEQUALIZER