Filter
Top Products
78
Note:
● If you have already adjusted the
graphic equalizer manually or if you
have not yet carried out any cali-
bration, “NO RESULT” will appear
in the display.
➮ Press the softkey 4 assigned to
the “FRNT” display item for the
front loudspeakers or “REAR” for
the rear loudspeakers.
➮ Press the softkey 4 assigned to
the “VIEW” display item.
If you want to select the equalizer view
without equalization,
➮ press the joystick 7 repeatedly to
the left or right until “PRE EQ” ap-
pears in the display.
The equalizer setting is displayed.
If you want to select the equalizer view
with equalization,
➮ press the joystick 7 repeatedly to
the left or right until “POST EQ” ap-
pears in the display.
The equalizer setting is displayed.
To close the view,
➮ press the joystick OK 7 or the
MENU button 8.
Adjusting the graphic equalizer
manually
You can also manually adjust the auto-
matically ascertained values of the
graphic equalizer.
➮ Press the DSA button 5.
➮ Press the softkey 4 assigned to
the “USER” display item.
➮ Press the softkey 4 assigned to
the display item of the equalizer
that you want to set up.
➮ Press the softkey 4 assigned to
the “ADJ” display item.
You can adjust the equalizer for the front
and rear loudspeakers separately.
➮ Press the softkey 4 assigned to
the “FRNT” display item for the
front loudspeakers or “REAR” for
the rear loudspeakers.
The graphical equalizer settings are dis-
played.
To select the frequency,
➮ press the joystick 7 to the left or
right.
➮ Adjust the level for the frequency
by moving the joystick 7 up or
down.
The values appear graphically in the
display whilst you are adjusting the
equalizer.
➮ Adjust all the settings for both
channels as described above.
➮ Press the joystick OK 7 or the
DSA button 5 to close the menu.
The settings are saved.
DSA - EQUALIZER