Filter
Top Products
Specifications
.
Audio Power Specifications
Power Output and Total Harmonic Distortion: 13.5 watts per channel minimum continuous average
output into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonic
distortion.
Other SDecifications
Tuner
FM
Tuning Range:
Intermediate Frequency:
FM Mono Sensitivity:
Seek lo sensitivity:
Seek sensitivity
Selectivity:
Signal-to-Noise Ratio:
Harmonic distortion at 1
kHz:
Separation:
Frequency Response:
AM
Tuning Range:
Seek lo sensitivity
Seek sensitivity:
Intermediate Frequency:
Signal-to-Noise
Ratio:
Frequency Response:
Audio
Speaker Impedance:
Maximum Amp Power:
RMS Power:
Bass Control:
Treble Control:
Loud:
Preamp Output:
Cassette
Signal-to-Noise Ratio:
with Dolby B Noise Reduction:
Tape Wow and Flutter:
Tape Frequency Response:
General
Dimensions (w/o projecting parts/controls):
Mass:
Power Requirement (neg. grnd.):
Operating Temperature:
Supplied Accessories:
Optional Accessories:
87.5
-
107.9 MHz
10.7 MHz
13
dBf
51
dBf
31
dBf
80
dB
at 400kHz
65
dB
(stereo), 70
dB
(mono)
0.7% (stereo), 0.5% (mono)
30
dB
30-l 5,000 Hz
f
3
dB
530
-
1,710
kHz
50
dBpV
30 dBftV
450
kHz
50
dB
30-5,000
Hz
+
3dB
4-8 ohms
4 X 35 Watts (at 4 ohms)
4 X 13.5 Watts (at 4 ohms)
cl%
THD
f
10
dB
@
100 Hz
?I
10
dB
@
10
kHz
+ 8
dB
@
60 Hz
&
+ 2
dB
Q
8
kHz
3.0 Volt Preamp Output (Max. w/
cl%
THD)
4-Channel. Low-lmpendance (100
L,I)
Preamplifier
55
dB
65
dB
0.10%
dB
30-l 8,000 Hz + 3
dB
180 x 52 x 155 mm, 7 x 3 x
61/s
in.
Approx. 1.4 kg (3.0 lb.)
12 V DC car battery (1 l-16 V DC allowable)
15°F to
12O”F,
-10°C to 50°C
l
Unit
l
Faceplate
l
Wire Harness, including
e-Channel
RCA Preamp Output
Harness
l
DIN Sleeve
l
Mounting Hardware
l
Owner’s Manual in English, French, Spanish and Portuguese
l
4-Channel Preamp Output Harness (Part No. 8634494218)
Design and specifications subject to change without notice.
11