Filter
Top Products
22
9. Setup
English
6) AUDIO OUT
DVD disc can support various audio out and
you can select analog or digital (SPDIF/RAW,
SPDIF/PCM) type by the desired Amp or
other audio systems. If the Amp or other
audio system can receive digital audio input,
connect the cable to the Digital audio out jack
on the rear panel of the player and then select
SPDIF/RAW or SPDIF/PCM type. If digital
audio out signal is supplied to audio system or
receiver unavailable of digital decoding, it
causes high-tone noise and can damage the
speakers. DTS DVD disc sound is displayed
only if DVD player is connected to Amp
equipped with DTS decoder.
7) CAPTION
You can select CAPTION or non-CAPTION
mode in screen by setting this menu.
8) SCR SAVER
Select the screen saver function using this
menu.
9-2. AUDIO SETUP
In the GENERAL SETUP, select the
ANALOG in the audio out menu. Then,
DOWN MIX setting menu is displayed.
1) AUDIO MODE
If the TV/Monitor has only one audio input,
connect the TV/Monitor to L or R jack on the
rear part of the player and select LT/RT in the
menu. When the TV/Monitor or Amp is used
for stereo input, select STEREO in the menu.